|
|
Multifunctional building
Starý, Martin ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
This master’s thesis focuses on the preparation of project documentation for construction part of a multifunction building. This buildig has a five floors, the first one is a underground and four of them are above grand. The building is located in part of Prague – Dolní Chabry. Building has a rectangle shape which isin the midle shifted and makes two similar section. Each sectin has own main entry, stairs and lifts. Orientation the longer facades of the multipurpose house are facing to south and north in the longer asis. Garage for resident is located in the lowest floor. In the first floor above ground is commercial part of the house, six commercial spaces. In the rest of the floors are located 26 apartments. Vertical structure are made of the Porother systém and Best systém, celings are meda from prefaricated reinforced concrete panels. Structure of the roof is solid by single skin flat roof.
|
|
|
The Multifunctional House
Pánek, Martin ; Struhala, Karel (referee) ; Manychová, Monika (advisor)
The main concern of this thesis is to design a five-storey multifunctional house. The house is divided into the main living area to which it belongs especially residential units accessible by stairs from the ground floor and also basement boxes and room for prams. On the ground floor are also located the individual garage, store room and technology. The house has four floors and a basement, the basement are located mass garages. The house has a sloping wooden roof trusses.
|
|
|
Multifunktion building
Zeťka, Lukáš ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
This master’s thesis focuses on the preparation of project documentation for construction of a four-storey multifunction building. The building is located in Říčany u Prahy. The longer facades of the multipurpose house are facing to the east and west and its gables are facing to the south and north. The building is divided by a staircase into two virtually identical parts. The perimeter wall on the ground floor is at its eastern facade recessed. This allowed to create a covered archway over the entrance the commercial part of the house. The surface of the facades of the second to fourth storey is divided by loggias and terraces. The commercial spaces are located on the ground floor and there is a total of 24 apartments on the rest of the storeys. The vertical supporting structures are made of the Porotherm system, the ceilings are made of precast reinforced concrete panels. The structure's roofing is a flat roof.
|
|
|
Multipurpose building
Řezníček, Marek ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
The diploma project is involved in structure design of multipurpose house. It´s four floor building with one underground floor and flat roof. Structure system is reinforced concrete skeleton. Ceilings are solved as reinforced concrete slabs, spot supported by columns with circuit reinforcing beam.
|
|
|
versatile house
Jakubcová, Monika ; Mazánek, Pavel (referee) ; Mazánek, Pavel (advisor)
This thesis addresses the design of multi-purpose building with six floors. The building is located on gently sloping terrain in central Blansko, the plot number 2840th. The first floor is designed for services and other floors are designated for housing. The building has 8 flats – 1 room + kitchenette and 10 flats – 2 rooms + kitchenette, a total of 18 housing units. The supporting structural system is transverse. The walls of the house are built from blocks POROTHERM. The roof is designed as a flat. Windows and doors are wooden.
|
|
|
Multipurpose building in Veselí nad Moravou – gross superstructure
Le, Duc Nam ; Doubek, Rostislav (referee) ; Biely, Boris (advisor)
The subject of this bachelor's thesis is the construction technological project of the gross superstructure (without roofing) of a multipurpose house in Veselí nad Moravou. The building is designed as a trapezoidal building with three floors above ground and with a main loadbearing structure made of a steel frame and prestressed ceiling panels. Additional strengthening of the building consists of a gable wall and a reinforcing core made of ceramic blocks. The work includes a technical report focused on the gross superstructure, a technical report on the site equipment, a solution to the broarder traffic relations, a design of the machine lineup, an itemized budget, a time schedule, a technological procedure, an inspection and test plan, safety and health protection at work, environmental protection and a comparison of the construction technology of the RC monolithic staircase and the RC prefabricated staircase.
|
|
|
Multifunctional building
Starý, Martin ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
This master’s thesis focuses on the preparation of project documentation for construction part of a multifunction building. This buildig has a five floors, the first one is a underground and four of them are above grand. The building is located in part of Prague – Dolní Chabry. Building has a rectangle shape which isin the midle shifted and makes two similar section. Each sectin has own main entry, stairs and lifts. Orientation the longer facades of the multipurpose house are facing to south and north in the longer asis. Garage for resident is located in the lowest floor. In the first floor above ground is commercial part of the house, six commercial spaces. In the rest of the floors are located 26 apartments. Vertical structure are made of the Porother systém and Best systém, celings are meda from prefaricated reinforced concrete panels. Structure of the roof is solid by single skin flat roof.
|
|
|
Multifunktion building
Zeťka, Lukáš ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
This master’s thesis focuses on the preparation of project documentation for construction of a four-storey multifunction building. The building is located in Říčany u Prahy. The longer facades of the multipurpose house are facing to the east and west and its gables are facing to the south and north. The building is divided by a staircase into two virtually identical parts. The perimeter wall on the ground floor is at its eastern facade recessed. This allowed to create a covered archway over the entrance the commercial part of the house. The surface of the facades of the second to fourth storey is divided by loggias and terraces. The commercial spaces are located on the ground floor and there is a total of 24 apartments on the rest of the storeys. The vertical supporting structures are made of the Porotherm system, the ceilings are made of precast reinforced concrete panels. The structure's roofing is a flat roof.
|
|
|
Multipurpose building
Řezníček, Marek ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
The diploma project is involved in structure design of multipurpose house. It´s four floor building with one underground floor and flat roof. Structure system is reinforced concrete skeleton. Ceilings are solved as reinforced concrete slabs, spot supported by columns with circuit reinforcing beam.
|
|
|
versatile house
Jakubcová, Monika ; Mazánek, Pavel (referee) ; Mazánek, Pavel (advisor)
This thesis addresses the design of multi-purpose building with six floors. The building is located on gently sloping terrain in central Blansko, the plot number 2840th. The first floor is designed for services and other floors are designated for housing. The building has 8 flats – 1 room + kitchenette and 10 flats – 2 rooms + kitchenette, a total of 18 housing units. The supporting structural system is transverse. The walls of the house are built from blocks POROTHERM. The roof is designed as a flat. Windows and doors are wooden.
|
guest ::
